Stepper Motors and Servos ***Prices as shown, in USD*** Contact and Shipping Info
 Sears 13.2 volt variable speed and torque cordless
drill. These make excellent motors for robotic applications.
Sell ( I have two of them) for $20.00 each. Okay, not a stepper but
shown here because it was lonely on it's own page. |
big stepper $10.00 |
big stepper $10.00
|
 small
stepper $5.00 |
The above are typical types. Refer to table for all the others I have. For more information, let me know and I'll send you a picture.
|
Manufacturer |
Volt |
ohm |
mA |
deg/step |
torque |
shaft |
Type/serial |
wires |
| Sinano Electric | 3.5 | 1300 | 1.8 | 1"wire spooler | 4h5618s-0806 | 4 | ||
| Matsushita | 4 | 4.0 | 1.8 | 7/16" plastic belt | pjjq62ya-k | 6 | ||
| Sanyo Denki | 4.5 | 1400 | 2 | 2-1/2 gear | easy mount | |||
| Sanyo Denki | 4.5 | 1400 | 2 | 2" gear | large type 1038200241 | |||
| Superior Electric | 5 | 1000 | 1.8 | 35oz-in | 3/4 plastic gear | m061-fd-353du | 8 | |
| Superior Electric | 5 | 1000 | 1.8 | 35oz-in | 3/4 plastic gear | m061-fd-353du | 8 | |
| Tamagawa | 5 | 1000 | 1.8 | 83oz-in | 1" wire spooler | ts3103n615 | 6 | |
| Minebea | 6 | 750 | 1.8 | 7/16" plastic belt | pjjq25za-a | 6 | ||
| Oriental Motor | 6 | 1200 | 1.8 | 1/2" belt drive pulley | a3062-9212 | 6 | ||
| Vexta | 6 | 1200 | 1.8 | |||||
| Oriental Motor | 6 | 1200 | 1.8 | 1/2" belt drive pulley | a3062-9212 | 6 | ||
| Matsushita | 12 | 1.8 | 5/8 pulley | |||||
| Matsushita | 12 | 80 | 1.8 | 5/8" spool | 39shm-32bab | 4 | ||
| Shibaura | 12 | 75.0 | 1.8 | 5/8" spool | s4h40b123-07 | 5 | ||
| Shinano Kenshi | 12 | 160 | 1.8 | 5/8 pulley | sth-39d104-03 | 6 | ||
| Shinano Kenshi | 12 | 7.5 | 1.8 | 5/8 pulley | sth-39d107 | 6 | ||
| Shinano Kenshi | 12 | 160 | 1.8 | 5/8 pulley | sth-39d104-03 | 6 | ||
| NA Philips | 12 | 3.5 | 5/8 gear plastic | k82701-p2 | 8 | |||
| Airpax | 12 | 36 | 7.5 | 1/4 | a82709-m2 | 6 | ||
| Copal Electra | 12 | 36.0 | 7.5 | 1/4" shaft | sp-57 969978 | 10 | ||
| Copal Electra | 12 | 36.0 | 7.5 | 1/4" shaft | sp-57 043283 | 10 | ||
| NA Philips | 12 | 36.0 | 7.5 | 5/8 plastic gear | k83701-p2 | 8 | ||
| NA Philips | 12 | 36.0 | 15 | 5/8 plastic belt | k83701-12 | 8 | ||
| Sankyo | 12 | 34.0 | 15 | plastic gear with mech | msac024b31 | 5 | ||
| Fuji | 12 | 36 | 3/8" gear | smr55-4805-a | 6 | |||
| Fuji | 12 | 36.0 | 1/4" shaft | sm55-4801 | 6 | |||
| Fuji | 12 | 36.0 | 1/4" shaft | sm55-4801 | 6 | |||
| Fuji Electrochemical | 12 | 32.0 | 1/4" shaft | smt70-9601 | 6 | |||
| Seiko | 12 | 690 | long 1/8" shaft | sst-20c120l | 5 | |||
| Airpax | 24 | 61.1 | 7.5 | 1/2 plastic gear | b82764 | 6 | ||
| Airpax | 24 | 61.1 | 7.5 | 1/2" plastic gear | b82764 | 6 | ||
| Airpax | 24 | 61.1 | 15 | 1/2 plastic gear | a83713 | 6 | ||
| Novatronics | 24 | 28.0 | 900 | 15 | 6" worm gear | from old 8 dd. 15-4ph-vr | 5 | |
| Sankyo | 24 | 82.0 | 3/16" gear | msab024e01 | 6 | |||
| Sankyo | 24 | 70.0 | msce048c27 | 6 | ||||
| Vorsicht/Sanyo | 27 | 50.0 | 1/4" gear | cp-034 910316 | 5 | |||
| Sanyo | 30 | 300 | 1.8 | c/w solenoid | 6 | |||
| Sankyo | 30 | 88.0 | 7.5 | 1/2" gear | msae048c03 | 6 | ||
| Sankyo | 30 | 310.0 | 1/8" gear |